Development of an injection rate meter based on a laser

Doppler anemometry

Tetsuji Koyama, Tsuneaki Ishima and Tomio

Obokota

Analysis of Lubricant Oil Film Behavior on the Piston

Surface According with Piston Shapes by Means of LIF

and PIV

Masaaki Kato, Kazuki Fujita, Hidekazu

Suzuki, Yasukazu Baba, Tsuneaki Ishima and

omio Obokota

Effect of Intake Manifold Orientation on In-Cylinder

Tumble Flow Structure in an Internal Combustion

Engine − An Analysis Using Particle Image Velocimetry

B.Murali Krishna and J.M.Mallikarjuna

Flow visualization in exhaust manifold for automobile

engine

Kenta Haga, Intan Hidayah, Yuji Shinozaki,

Yasuhiro Tsuda, Tsuneaki Ishima, Shuji

atsumura and Tomio Obokata

Investigation on Performance, Combustion and

Emission Characteristics of a Turbocharged Low Heat

Rejection DI Diesel Engine with Extended Expansion

Concept

S.Stephen Bernard

Performance of gerotor oil pump for an

Automotive engine – prediction using cfd analysis

And experimental validation

R.Elayaraja, P.Lingeswaramurthy,

S.Govindarajan

Experiences in improving the Low end performance of a

Multi Purpose Vehicle (MPV) equipped with a common

rail Diesel engine.

Dilunath Hareendranath, Nilesh Gajarlawar,

Anant Tagare, Pundlik Ghodke

Improvement of Fuel Economy Using a New Concept of

Two-Stroke Gasoline Engine Applying Stratified-Charge

Auto-Ignition

Kenji Nishida, Hisashi Sakuyama, Takahiro

Kimijima

Database Constructions by LDA and PIV to Verify the

Numerical Simulation of Gas Flows in the Cylinder of a

Motored Engine

Tomio Obokata, Masaaki Kato And Tsuneaki

Ishima, Makoto Kaneko

Evaluating the EGR Distribution Effectiveness of Intake

Manifolds by CFD Technique

Sourabh Nandi and Aditya Mulemane

Laser Welding of Advanced High Strength Steels for

Tailor Welded Blank (TWB) Applications

B.Shanmugarajan, J.K.Sarin Sundar and

G.Padmanabham

Vehicular Damage Detection Using Strain Mode Shape

Sajal Roy, Naorem Giridhar Singh, and

Makarand Joshi

Performance and Emissions of a Spark Ignition Engine

Running on Gasoline Adulterated with Kerosene

Bivek Baral and Robert Raine

Emission Performance Improvements with Turbulent

Metal Substrates on 2 & 3 Wheelers

S.Rajkumar and G.Nagarajan

Spray Modeling for Lean NOx Trap Aftertreatment

System Design

Milind S Kulkarni, Lokanath Mohanta, James

McCarthy

Design of positive crankcase ventilation valve for

Automotive gasoline engine – validation by simulation

Using cfd and by experiments

P.Jeya Prakash Singh, P.Lingeswaramurthy,

B.Srinivasan, S.Govindarajan

Predictive Technique Approach for Diesel Engine Piston

Ring Pack Design

Y.Harikumar, R.Mahadevan, N.Muralitharan,

S.Manivasagam and V.Rengarajan

Particulate Characterization of Biodiesel Fuelled

Compression Ignition Engine

Dhananjay Kumar Srivastava, Avinash Kumar

Agarwal, Tarun Gupta

A New Approach to Improve Diesel Engines Efficiency

R. Sivasaravanan, S. Rathhna Kumar

New Functional Safety Standard WD ISO 26262 and the

potential impact on the ECU development for the Indian

market

Lakshmi G Meti, Dr.Ing. Detlef Zerfowski

Differential Speed Based Bend Lighting in Adaptive

Front lighting system

Madhusudan Joshi, Hemant Singh, S.K.Kalia,

Saurabh Dalela, and Dinesh Tyagi

Ammunition Status Display System

Valluri Ravi Prasad, V.Balaguru, K.Sivakumar

Electronic Ignition of four stroke single cylinder engine

V.Saravana Prabu, C.D.Naiju

Vehicle Rollover Crash Simulation using Deformable to

Rigid Switching

Prabhakar Marur

Reliability Engineering in Automotive Industry for the

Local Market

Christian D. Lemm, Dr.-Ing. Detlef Zerfowski

An integrated approach to extract basic Suspension

Data through Integration of tri-axial spindle coupled road

simulator, wheel force transducer and a wheel

vector sensor.

Somashekhar G. Mathad, Bhaskar Chaturvedi,

Subramaniam L.
 

Study of Flame Characteristics of a Spark Ignition

Engine for Gasoline Fuel

K.A.Subramanian, Supriya Shukla, Manoj

Athwe, M.K.G. Babu, L.M.Das

Accident information system (AIS)

G.kalivarathan, C.Aravind

Dynamic Simulation of a Brake Valve in Air Brake

System

S.Sridhar, S.Narayanan, B.Kumaravel

Effect of CO2 Content in Producer Gases on

Performance and Emissions of a

Supercharged Dual-fuel Engine

Murari Mohon Roy, Eiji Tomita, Nobuyuki

Kawahara and Yuji Harada, Atsushi Sakane

Hybrid Fuel Blends- The Alternative Fuel for Transport

Bus Engine

R.Subramanian, G.Rajendiran,

R.Venkatachalam, N.Nedunchezhian,

K.Mayilsamy

Straight vegetable Oil Run Diesel Engine – A

Compromise Solution

B.S.Deshmukh, V.M.Thatte, V.V.Helchel,

M.N.Kumar, L.M.Das, M.K.G.Babu

Experimental Investigation on Emission and

Combustion Characteristics of Biodiesel and its Blends

on a CRDe SUV Engine/Vehicle

Murali Manickam, Mithun Kadambamattam,

Mathew Abraham.

Improvement of performance and emission

characteristics of a Di diesel engine with turbulence

induced piston (internal jet Piston) using biodiesel

blends

K.Rajan, K.R.Senthil kumar
 

Renewable and environment friendly oxygenated

biomass fuel Blends for diesel engines

E. Rajasekar, r.Subramanian, n. Nedunchezhian
 

Theoretical investigation of the performance of

Vegetable oil operated ci engine for various equivalence

Ratio

S.Sundarapandian, G.Devaradjane

Performance and emission characteristic evaluation of

a single cylinder four stroke diesel engine running on

hydrogen and diesel in dual fuel mode under

different EGR conditions.

Probir Kumar Bose, Rahul Banerjee

Novel Methodology to Utilise Neem (Azadirachta Indica)

Oil in a Direct Injection Compression Ignition Engine:

Performance and Emissions Characterization

Avinash Kumar Agarwal1, Deepak Agarwal
 

Investigation of the lpg induction jet angle with injector

nozzle Angle in a dual fuel diesel engine using cfd

technique

C.J.Thomas Renald, Dr.P.Somasundaram,

V.Satheeshkumar

Improvement of Atomization Characteristics of

a Micro Nozzle Array Type Gasoline Injector

Mikiya Araki, Tomio Obokoto, Tsuneaki

Ishima, Seiichi Shiga, Masahiko Masubuchi,

Tomojiro Sugimoto

Combustion and emission characteristics of diesel,

b100 and b20 Fuel on a thermal barrier coating on

piston crown in direct Injection c.i. Engine at optimum

iop and it

D.A.Dhananjaya , P.Mohanan, C.V.Sudhir

Robust PID Controller with Computational Intelligent

based Decision maker for Brushless DC (BLDC) Motor

in Electric Vehicle for Indian Roads

Poorani Shivkumar

Design and Analysis of Power Train of a Series Hybrid

Electric Car

S.Anandhan, S.N.Sridhara, S.R.Shankapal

Development of a parallel hybrid electric vehicle

Ajay Kumar Gupta, B.A.Landge

Characterisation Of Passenger Vehicle In-Cabin NoiseUsing OMA And Sound Quality Techniques – An Integrated Approach

Muthu Saravanan, Chetan Prakash Jain &

Mahesh Kumar Balthy

Numerical Studies on the Effect of Cooling Vent Setting

and Solar Radiation on Air Flow and Temperature

Distribution in a Passenger Car

Vivek P.Adhikari, Abdul Nassar, Q.H.Nagpurwala

Characterization and Reduction of Power Steering Hiss

noise for Passenger Car

Santosh Jagtap, Arunachalam Madaswamy,

George Winney

Simulation and Validation of Passenger Compartment

Soaking and Cooling under Solar Load

Ashok Patidar

Battle Tank Fuel Capacity (Total Volume) Monitoring

system

S.Parthasarathy, V.Balaguru, K.Sivakumar

UV-Curable Primer-cum-Paint System for Mild Steels

based on Sol-Gel Coating Technology

K.R.C.Somaraju, R.Subasri, A.Jyothirmayi,

T.Gururaj, G.Padmanabham

Laser Surface Hardening Of Crankshaft

S.M.Shariff , Manish Tak and G.Padmanabham,

S.Shanmugam

An Optimal Solution Through Lean Manufacturing Using

Value Stream Mapping Towards Efficient Production For

A World- Class Automobile Brakes Manufacturing

Company

V.Satheeshkumar, C.J.Thomas Renald,

M.Thiagarajan, G.K.Sathiyamanoj

Design of the Occupant Protection System for Critical

Side Impact requirements

P.Chandra Mouli

Analysis of Road Traffic Accidents on NH 45

(Kanchipuram District)

Ravishankar Rajaraman, Ahamedali M. Hassan,

Jeya Padmanaban

Effect of load slope time (LST) and load adaptor

position (LAP) on side door strength of passenger cars:

A deformation mapping matrix (DMX) approach

Ratnadeep Dewan, Vivek Kumar Srivastava

A Model for the Mechanical Subsystem of an Air Brake

System

Dinesh B.Sonawane and

Shankar C.Subramanian

Global Application Features of KB, a New Gasoline

Engine for Compact Vehicles

Michihiro Kato, Masamichi Suzuki, Yoshihito

Kamata, Makoto Hayami, Kenji Inoue, Takeshi

Nagaya

Exterior Styling of an Intercity Transport Bus for Improved

Aerodynamic Performance

Arun Raveendran, S.N.Sridhara, D.Rakesh,

S.R.Shankapal

Simulation and Experimental Study of Torque Vectoring

on Vehicle Handling and Stability

Rajiv Kumar, Bharath K Suda, Sandeep

Karande, Damrongrit Piyabongkarn, Chinmaya

Patil

Skid Steering Analysis of Tracked Vehicles

B.Janarthanan, C.Sujatha and Chandramouli

Padmanabhan

Finite Element Study on Piston Assembly Dynamics

Emphasis with Lubrication

Ravindra R.Malagi, Shivakant N. Kurbet,

N.Gowrishenkar