SAEINDIA Mobility Congress 2005

SAEINDIA Mobility Congress 2005
SAE Paper No. Title Authors

2005-26-301

A Case for RFID in Indian Automotive Industry

Ashfaque Ahmed Ansari, S.Murali and Venkatesh Natarajan

2005-26-302

Development of a Controller for a 1000 HP Engine of an Armoured Fighting Vehicle

M Khader Basha, T.Soundarapandian,

V.Kumaravelu, B.Balakrishna Reddy,

N.Achuthan, Krishna Vasudevan, A.Ramesh and

V.Ganesan

2005-26-303

An Evaluation Algorithm of IPS in Automotive Application

Ealgoo Kim, Taeyeon Lee, Hakbong Kim,

Shiva Krishna, William Peng, Kison Lee,

Seomun Jin, Jaehong Park, Koojung Lee,

Sunsuk Ok and Jangdon Choi

2005-26-304

Hardware in the Loop Simulation (HIL) for Vehicle Electronics Systems Testing and Validation

Ganesh Babu.M

2005-26-305

A Case for Open Source in Automotive Embedded Systems

L.Yaamini Devi and S.Gopalakrishnan

2005-26-306

Trends in Automotive Remote Diagnosis

T.V.Ramadasu

2005-26-307

Malware in Automotive Electronics – Potential Threats and Scenarios

Roland H. Haas, Asoke Talukder,

Ramesh Venkatram, Vivek Khariwal and

Daimler Chrysler

2005-26-308

Powertrain Challenges Impact on Semi-conductor Solutions

Patrick Leteinturier

2005-26-309

Brain Controlled Car for the Disabled Using Artificial Intelligence

Sudharsan Bharath

2005-26-310

Finite-Element Analysis of Al-SiCp Composite Poppet Valve Guides

Rajesh Purohit, Rakesh Sagar

2005-26-311

CAE Used for Durability Analysis – A Case Study

G.D.Bhide, S.P.Chavan and Abhijit Sobale

2005-26-312

Computer Simulation of Combustion Characteristics of MPFI Engine

J.Nanmugavel, M.Kumaresan, G.Devaradjane

2005-26-313

Optimization of Blanks for Sheet Metal Forming

K.Hariharan, R.Malhan, K.K.Rama Rao,

M.P.Siva Kumar and S.Suresh

2005-26-314

Evaluation of Various Energy Absorption Mechanisms Using FEA and Its Validation

S.K.Patidar, R.S.Mahajan and Raju.S

2005-26-315

Modeling of Combustion and Emission Characteristics of Homogeneous 
Charge Compression Ignition Engine

S.Rajkumar and G.Nagarajan

2005-26-316

Analysis of a Six-bar Rack-and-Pinion Steering Linkage

A.Rahmani Hanzaki, S.K.Saha and P.V.M.Rao

2005-26-317

Design and Development of Combustion Chamber for Small Gas Turbine Power Plant

Digvijay, B.Kulshreshtha and S.A.Channiwala

2005-26-318

Predictive Technique Approach for Diesel Engine Piston Ring Pack Design

Y.Harikumar, R.Mahadevan, N.Muralitharan,

S.Manivasagam and V.Rengarajan

2005-26-319

The Effect of Induced Swirl Pattern on TDC Flow Field in a HSDI Diesel Engine

S.Alfred Herman and V.Ganesan

2005-26-320

Identification of Key Vehicle Parameters for Pedestrian Impact Safety

Rahul V Pathare, Nilesh Tawde and Ayub Miraje

2005-26-321

An Automated Shape Optimization Procedure for Drag Reduction of Ground Vehicles

S.Venkat and S.Rasmi

2005-26-322

Influence of Time Gap on the Number of Interrupting Cars and the Traveling Time

Taro Kumagai, Yuji Matsuki, Kazunori Shidoji

and Masahiko Ogawa

2005-26-323

A Comparison between Subjective Traveling Time and Actual Traveling Time in terms of Driving Speed

Yuji Matsuki, Kazunori Shidoji, Katsuya

Matsunaga and Taro Kumagai

2005-26-324

A Comparative Study of Composite and Steel Front Rails for Vehicle Front Impact Safety

A.Naravane, A.Deb and N.D.Shivakumar,

H.C.Chittappa

2005-26-325

Multi-Objective Optimization of Automotive Bumper System for Low Velocity Frontal Impact

Kaushik Sinha and Suresh Nagesh

2005-26-326

Effect Of Element Quality On Interface Check Forces In Acoustic Sensitivity Analysis

C.Anantha, Hebbale, K.Ramanathan and

Suresh Nagesh

2005-26-327

Application of Light Weight Structural Foams for Crashworthiness of In-Production Passenger Cars

Sujit Chalipat, Sarang Kshirsagar and Ajit

Gokhale

2005-26-328

Durability Analysis of a Truck Cab

B.S.Manjunatha and Thulasiram Vajrala

2005-26-329

A Report on Improving the Ride and Handling Performance in the Roll and Pitch Modes of an Utility Vehicle

Subiman Das, P.Ramamurthy and

K.Balasubramanyan

2005-26-330

Achieving Reliability Growth by Probabilistic Design of Components Considering Strength Degradation of Materials and Stochastic Nature of Design Variables

N.Subbiah and S.Krishna Kumar

2005-26-331

Current Research Challenges in Solidification Modeling of Automotive Castings

Suresh Sundarraj

2005-26-332

Multistage Process Optimization for Manufacturing Automotive Component Using Finite Element Method

K.Narasimhan and Anup Kumar Sharma

2005-26-333

High Strength Steels for Automotive applications: Recent Trends and Experience at Tata Steel

N.Gope, D.K.Rout, S.Mukherjee, G.Jha,

A.N.Bhagat, A.K.Verma D.Bhattacharjee and

A.K.Srivastava

2005-26-334

Active Noise Control Simulation in a Passenger Car Cabin Using Finite Element Modeling

A.R.Ohadi and A.Emadi

2005-26-335

Optimization of Tyre Pattern Noise and Validation

Renji Issac N. Pradeepkumar, M.K.Jain

2005-26-336

Aero-acoustic Assessment Over a Vehicle Side Glass Using Surface Pressure Measurements

Mark A Burnett

2005-26-337

Full Vehicle Hybrid Simulation Applied to Vehicle Interior Noise Optimization

François Gérard and Peter Mas

2005-26-338

Sound Quality Analysis of a Two Wheeler at Idling

P.S.Mahale and S.Raju

2005-26-339

Study of Flow through Air Filter for Off Highway Vehicle – A Preliminary CFD Approach

P.Thiyagarajan and V.Ganesan

2005-26-340

Design and Development of Light Weight Flexible Power Transmission Shaft for High Speed Fighter Aircraft

S.Jothi and V.Balamurugan, S.Ganesan

2005-26-341

Development of Compact Twin Circuit Heat Exchanger in the Cooling System of a Combat Vehicle

A.Kumarasamy and P.L.Sathyanarayanan

2005-26-342

Future Main Battle Tank - Mobility Requirement Poses a New Dimension to the Tank Design

J.Roopchand and B.Rajagopalan.

2005-26-343

Study of effects of damper oil volume lag on Hydrogas Suspension used in Armoured Fighting Vehicle

Swarna Ramesh, S.Sundaresh,

M.Singaperumal

2005-26-344

Experimental Investigations on Performance and Emission Characteristics of CNG in a Spark Ignition Engine

S.Maji. P.B.Sharma and M.K.Gajendra Babu

2005-26-345

Effects of Carbon dioxide, Nitrogen and Exhaust Gas with Intake Air on DI Diesel Engine Emission and Performance Characteristics

R.Anand and N.V.Mahalakshmi

2005-26-346

Overview of EGR, Injection Timing and Pressure on Emissions and Performance of CI Engine with Pongamia Methyl Ester

J.G.Suryawanshi and N.V.Deshpande

2005-26-347

The Effect of NOx /Soot Ratio on the Regeneration Behaviour of Catalysed Diesel Particulate Filters for Heavy Duty Applications

K.V.R.Babu, Basu Sudipto, B.S.Kang, Nicola

Soeger, Lothar Mussmann, Ralf Sesselmann,

Owen Bailey and Masao Hori

2005-26-348

Diesel Exhaust Particulate Characterization for Poly Aromatic Hydrocarbons and Benzene Soluble Fraction

K.V.L.Bharathi, Dipankar Dwivedi, Mukesh

Sharma and Avinash Kumar Agarwal

2005-26-349

Performance, Emission and Combustion Characteristics of a Hydrogen Fueled SI engine – An Experimental Study

V.Subramanian, J.M.Mallikarjuna and

A.Ramesh

2005-26-350

Review Of Fuel Induction Technologies for Automotive Hydrogen Propulsion

M.K.Mahesh, Neelu, C.Prakash and

G.Viswanathan

2005-26-351

Methanol-Ethanol-Gasoline Blended Fuel (M5e20) Injection Investigations on Single Cylinder SI Engine

A.A.Latey, T.S.Bhatti, L.M.Das and M.K.Gajendra

Babu

2005-26-352

Basic Aspect of Combustion of CNG Incylinder Direct-Injection with Spark-Ignition

Seiichi Shiga, Mikiya Araki, Tomio Obokata,

Xi’an, China Hitoshi Ishii, Takamasa Ueda,

Mitsuhiro Tsue abd Michikata Kono

2005-26-353

Evaluation of Performance, Emission and Combustion Parameters of a CI Engine Fuelled with Bio-Diesel from Rubber Seed Oil and its Blends

V.Pradeep and R.P.Sharma

2005-26-354

Combustion Characteristics of Rice Bran Oil Derived Biodiesel in a Transportation Diesel Engine

Shailendra Sinha, Avinash Kumar Agarwal

2005-26-355

Performance and Emission Characteristics of a CI Engine Fueled with Esterified Cottonseed Oil

M.Leenus Jesu Martin, D.Prithviraj,

K.C.Velappan

2005-26-356

On Road Testing of Advanced Common Rail Diesel Vehicles with Biodiesel from the Jatropha Curcas plant

Sanjeev Mandpe, Suhas Kadlaskar, Winfried

Degen and Stefan Keppeler

2005-26-357

Characterization of Particulates with Different Blends of Bio-Fuels in Light Commercial Vehicle

M.Subramanian, M.Muralidharan, P.C.Kanal and R.K.Malhotra

2005-26-358

Characteristics of CNG Direct Injection with Auto-Ignition

Mikiya Araki, Hui Dong, Tomio Obokata, Seiichi

Shiga, Kiyohira Aoki and Tsuneaki Ishima

2005-26-359

Design of a Digital Electronic Fuel Injection System for Gasoline Direct Injection in a Two Stroke Cycle Spark Ignition Engine

Mohammad Marouf Wani, M.K.Gajendra Babu

and T.S.Bhatti

2005-26-360

Up-gradation of IDI Engine Combustion for 3-Wheeler Application to Meet 2005 BS-II Emission Norms

P.G.Bhat, D.R.Nene and N.V.Marathe,

H.P.Shashishekar and M.Della Valle

2005-26-361

Parametric Study on Fin Heat Transfer for Air Cooled Motorcycle Engine

Zakirhusen K Memon, T.Sundararajan,

V.Lakshminarasimhan, Y.R.Babu and   Vinay

Harne

2005-26-362

Motorcycle Engine Management System with Microcontroller and Smart Drivers

Robert T P Tan and Tervin Tan Seng Hung

To purchase, contact SAEINDIA who in turn will take it up with SAE International

Publications Calendar

S M T W T F S
 
 
 
1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
 
10
 
11
 
12
 
13
 
14
 
15
 
16
 
17
 
18
 
19
 
20
 
21
 
22
 
23
 
24
 
25
 
26
 
27
 
28
 
29
 
30
 
31
 
 

Publications Archives

Publications Search

E.g., 2017-03-29
E.g., 2017-03-29
Bangalore Section Eastern Section Northern Section Southern Section (Including Coimbatore & Hyderabad Division) Western Section (Including Nashik & Indore Divisions)
Professional Students General News Letter
Why Should you Join SAEINDIA Membership Classification & Benefits Registration Application Forms
Guide lines for Formation of SAEINDIA Collegiate Club Student Membership Application Form SAEINDIA Collegiate Club Application form Collegiate Club Reimbursement Claim Form Collegiate Club Listing
General Information History vision&Mission Managing Committee Useful Links